Viking MAC OS Betriebsanweisung PDF herunterladen (Seite 18)

VIKING COMPONENTS 33.6K/56K PC CARD USER’S GUIDE

Windows 3.x Software

Note: Before installing Viking modem,“Card and Socket Services”must be installed

in your system. This software is provided by your computer’s manufacture.

1. In the “Program Manager,” look for the card services group. It may be

SystemSoft Tools, Phoenix or Toshiba Card Manager, IBM CardWizard or a similar

sounding group.

2. Once in the group, run the information program, CardWizard, PCMWIN or

whichever icon indicates a configuration or information type of utility.

3. Notice the information given about the inserted card, especially the Com Port

and IRQ given the modem. Then close the window.

4. Open the “Main” group and select “Control Panel.” Select “Ports,” then select the

correct port and click on “Settings.” In “Settings” select “Advanced.” Set the IRQ to

be the same as that shown in the card information. Click “OK”and restart windows

as prompted. Back in windows, open the “Accessories” group and double-click on

“Terminal.”

5. In “Terminal,” click on the “Settings” and then on “Communications.” Select the

proper Com port. There is no need to worry about the rest of the settings. Click

“OK.”

6. Insert the QuickLink III diskette into the floppy drive and access it via your usual

methods. The run “Setup.exe.”

7. When prompted click “Install” and follow the on-screen instructions.

Your installation is now complete.

Chapter 3

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

Keine Kommentare

Viking MAC OS Betriebsanweisung Seite 18