Viking Built-In Spezifikationen PDF herunterladen (Seite 9)

CCaauuttiioonn

To avoid damage to ice maker, observe the following:

•Do not force ice maker arm down or up past stop position.

•Do not place or store anything in ice bucket.

UUssiinngg tthhee AAuuttoommaattiicc IIccee MMaakkeerr

The ice maker and slide-out ice bucket are not adjustable. The ice

bucket slides forward for easy access of ice. The ice maker will not

produce ice when the ice bucket is not in place. After the freezer

section reaches normal temperature, the ice maker fills with water and

begins operating. Allow 24-48 hours after installation before first

harvest of ice. Discard the first 3 harvests of ice after initially

connecting refrigeration to household water supply and after extended

periods of non-use. The ice maker produces 7 to 9 batches of ice in a

24 hour period under ideal conditions.

FFoorr rreeffrriiggeerraattoorrss wwiitthhoouutt gglliiddeess::

1. To remove, roll drawer out to the stop.

2. Remove lid by lifting to release hoods then pulling out.

3. Remove the drawer by lifting slightly and pulling out.

4. To replace, position drawer rollers behind the track roller.

5. Push drawer up and onto the track. Slide drawer back slightly.

6. Replace cover by inserting hooks into drawer then placing back and

front down.

7. Slide drawer back until it stops.

FFrreeeezzeerr FFeeaattuurreess

After ice is formed, the ice

maker drops ice cubes into the

ice bucket. During ice

production, the ice maker arm

raises and lowers. When the

ice bucket is full, the ice maker

arm turns ice maker off. To

manually stop ice production,

raise the ice maker arm. A

definite click is heard when

proper position is reached. In

non-dispensing models, ice maker will not function unless ice bin is

pushed all the way back into position.

SSoollvviinngg ccoommmmoonn iiccee mmaakkeerr pprroobblleemmss

PPrroobblleemm PPoossssiibbllee CCaauussee//SSoolluuttiioonn

Ice crescents attached at This is normal. They break apart easily.

orners Shake bin occasionally to keep cubes

separated.

Ice maker will not operate •On/Off lever is in the OFF (up)

or ice is not made fast position. Lower lever to ON (down)

enough. position.

•Freezer is not cold enough. Adjust

temperature controls and wait 24

hours.

Off-taste or odor in ice •New plumbing connections can cause

discolored or off-flavored ice.

Discard the first three harvests of ice.

•Cubes are stored too long. Throw

them away and make a new supply.

•Food is not wrapped properly.

•Freezer and ice bin need to be

cleaned.

•Water may contain minerals. A filter

may be needed to remove them.

FFoorr rreeffrriiggeerraattoorrss wwiitthh gglliiddeess::

1. To remove, roll drawer out to the stop.

2. Remove drawer by lifting up on the handle molded into the drawer.

3. Pull drawer out the rest of the way.

4. To replace, extend glides out to the

stop.

5. Place the drawer onto the glides and

push back until drawer engages.

6. Lower front part of drawer, grasp

glides/drawer and lightly squeeze

until drawer is level.

7. Slide drawer back until it stops.

Handle

Glides

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Viking Built-In Spezifikationen Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Viking Built-In