Viking VCBB363 Spezifikationen PDF herunterladen (Seite 34)

Align the holes on both ends of the louvered panel

with the holes in the base of the unit.

Adjust the kickplate to the desired height and fasten

in place by tightening the screws in the slot. Attach

the kickplate to the unit on each side with the two

black phillips head screws provided.

Attach to unit with

screws

(on both ends)

Slots for

adjustments (on

both ends)

KICKPLATE INSTALLATION

DOOR STOP ADJUSTMENT

1. Remove center grille louver from the top air grille

assembly.

2. Remove top air grille by removing (2) 1/4” screws with an

8” (20.3 cm) long magnetic 1/4” (.6 cm) nut driver. Pull

assembly forward.

3. Open refrigerator door so door stop arm and shoulder

screw are accessible. Shoulder screws should be in 110

door opening position.

4. Remove shoulder screw and place shoulder screw in the

or 120

door opening position.

5. Replace top air grille assembly.

HINGE ADJUSTMENT

Verify proper door alignment. Only the top hinge is adjustable.

1. Remove the center grille louver from the top air grille

assembly.

2. Remove top air grille by removing (2) 1/4” screws with an 8”

(20.3 cm) long magnetic 1/4” (.6 cm) nut driver. Pull

assembly forward.

3. Loosen the (4) top hinge screws.

4. Align refrigerator door by lifting.

5. Tighten screws.

6. Replace top air grille assembly

1 2 ... 29 30 31 32 33 34 35 36

Keine Kommentare

Viking VCBB363 Spezifikationen Seite 34