Viking E-40 Spezifikationen PDF herunterladen (Seite 7)

This feature selects the length of time that calls will remain connected without voice activity. Programmable in incre-

ments of 10 seconds up to a maximum of 90 seconds. To disable the silence time out, program ten ones in the “Time”

value location. Use the chart at the right. * Note: The factory default is 40 seconds.

D. Accessing the Programming Mode

Step 1. Move DIP switch 1 to the ON position (sets unit to answer incoming calls - see section C).

Step 2. Move DIP switch 3 to ON (incoming calls automatically enter the programming mode - see section C).

Step 3. From a Touch Tone phone call the line attached to the E-50.

Step 4. When the E-50 answers, 2 beeps will be heard and you will automatically enter the programming mode.

Step 5. When finished programming, enter “0000” to exit programming and move DIP switch 3 back to OFF (see section C).

The E-50 can be programmed from any Touch Tone phone using a telephone line, Viking model C-200, C-250, C-500

or C-2000B Entry Phone Controller, analog PABX/KSU station or a Viking model DLE-200B Line Simulator.

This feature selects the maximum length of time that calls can be con-

nected. Programmable in increments of 1 minute up to a maximum of

9 minutes. To disable the call length time out, program ten ones in the

“Time” value location. With the call length disabled, the E-50 phone

must rely on CPC, busy, silence or return dial tone to hang-up. Use

the chart at the right. * Note: The factory default is 5 minutes.

Time

Value

111

1111

11111

111111

1111111

11111111

111111111

10 or more

Call Length

Time Out

1 min

2 min

3 min

4 min

5 min*

6 min

7 min

8 min

9 min

Disabled

E. Quick Programming Features

Call length time out (1-9 minutes), 10 = disabled (factory set to 11111 = 5 minutes) .......................................

Silence time out for disconnect (10-90 seconds), 10 = disabled (factory set to 1111 = 40 secs) .....................

Talk/listen delay (VOX switching speed) 0.1 - 0.9 seconds (factory set to 111 = 0.3 secs) .............................

Forced hang-up command (used to exit programming and hang up the E-50) ..............................................

000

0000

111...

Select

Feature

beep

3 beeps

Wait for

Beep(s)

Enter

Time Value

beep beep

Wait for

2 Beeps

F. Programming Beeps

If a valid “Feature” is entered, a single beep will be heard and you will have 20 seconds to enter a “Time” value. If an

invalid “Feature” (five or more zeros) or forced hang-up command (four zeros) is entered, 3 beeps will be heard and

the E-50 will hang up. If a valid “Time” is entered 2 beeps will be heard and you will have 20 seconds to enter your

next “Feature”. If an invalid “Talk/Listen Delay Time” is entered (10 or more ones), 3 beeps will be heard and you will

have 20 seconds to enter your next “Feature”.

G. Call Length Time Out

H. Silence Time Out

Silence

Time Out

10 sec

20 sec

30 sec

40 sec*

50 sec

60 sec

70 sec

80 sec

90 sec

Disabled

Talk/Listen

Delay

.1 sec

.2 sec

.3 sec*

.4 sec

.5 sec

.6 sec

.7 sec

.8 sec

.9 sec

Error

This feature selects switching time between talk and listen modes (VOX switching time). Use the chart above.

* Note: The factory default is .3 seconds.

I. Talk/Listen Delay (VOX Switching Speed)

See Table A in section G

Table A

When the push button is pressed, the E-50 phone goes off-hook, much like a standard speaker phone. In the event that

the line is busy, the E-50 will hang-up. The E-50 will also automatically hang up on CPC, silence, busy signal, return to dial

tone or time out. If programmed to auto-answer (DIP switch 1 ON), the E-50 will also answer any incoming call.

The E-50 color video camera operates completely independently of the E-50 phone board. With power supplied to the cam-

era, it will continuously output a video signal.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Viking E-40 Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Viking E-40