Viking Emergency Phones Spezifikationen PDF herunterladen

1600A Series

ADA Compliant

Emergency Phones

September 18, 2014

ADA* Compliant Emergency Phones with

Built-In Digital Voice Announcer

• New Automatic Noise Canceling (ANC) feature for proper operation

in noisy environments

• Meets the latest ASME A17.1 code when used with the optional LV-1K

Line Verification Panel, see DOD# 246

• Meets ADA requirements for Emergency Phones:

- Automatically lights the “Call Connected” LED

- Transmits a unique location I.D. code or voice announcement

- Grade 2 Braille label for the visually impaired

• Non-volatile digital voice announcer with 16 seconds of voice memory

• Advanced call progress detection

• Handsfree operation

• Phone line powered

• Non-volatile memory (no batteries required)

• Marine grade 316 stainless steel prevents corrosion on stainless models

• Dials up to 5 emergency numbers

• E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO”

numbers

• Cycles through backup phone numbers on busy or no-answer

• Optional Enhanced Weather Protection (EWP), EWP products are

designed to meet IP66 Ingress Protection Rating, see DOD# 859

• Hangs up on CPC, silence, busy signal, dial tone, time-out or touch

tone command

• Programmable to auto-answer on incoming calls

• Remotely programmable

• Extended temperature range (-15°F to 130°F)

• 9 different chassis or board only available

• Available in 42” tall tower phone model E-1600A-BLT-EWP (DOD# 217)

• Central Station Monitoring capability (dials 2 numbers)

• Optional PB-100 Polling System available (DOD# 232)

• Optional BLK-3-EWP strobe light kit available (DOD# 653)

• Optional LC-6 Six Port Concentrator available (DOD# 245)

• Optional LV-1K Line Verification Panel available (DOD# 246)

• Optional E-1600A-MK-GNP Pedestal Mounting Kit (DOD# 227)

TECHNICAL

E-1600-45A

K-1600-EHFA

E-1600A

E-1600-02A

E-1600-03B

E-1600-20A

Power: Telephone line powered. Minimum 24V DC talk battery voltage,

with a minimum loop current of 20mA loop. Loop current may be boosted

on low current lines with a Viking Model TBB-1B talk battery booster, see

DOD# 632.

Dimensions: See Installation and Specifications

Operating Temperature: -26° C to 54° C (-15° F to 130° F)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

* Americans with Disabilities Act of 1992 contains federal reg-

ulations regarding elevator telephones (Public Law 101-336).

• Elevators

• Parking ramps/lots

• Emergency pool phones

• ATM machines

• Area of refuge locations

• Lobbies

• Entryways

• Campus emergency stations

• Roadside emergency stations

• Stadiums

• Convention centers

CAUTION - When installing on an analog extension of a phone system:

Some phone systems do not conform to analog telecom standards and might

not be compatible with the 1600A Series emergency phones. For a detailed

description of the telephone line specifications required for any of the 1600A

Series phones, see DOD# 869.

E-1600-55AE-1600-30A

E-1600-65A

E-1600-60A

The 1600A Series ADA Compliant Emergency Phones are designed

to provide quick and reliable handsfree communication for any stan-

dard analog telephone line or analog phone system station port. All

1600A Series phones meet ADA requirements for elevator/ emer-

gency telephones, and can be programmed from any Touch Tone

phone. The phones can dial up to 5 programmable emergency num-

bers, as well as 2 central station num-

bers. In addition, the E-1600-20A and

E-1600-52A feature a second "INFO"

button that will dial up to 3 non-emer-

gency numbers.

The 1600A Series phones can be pro-

grammed to automatically deliver a

digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered.

A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and

location numbers, are stored in non-volatile E

memory. All units are phone line powered, requiring no batteries or external power

and are compatible with common Central Station Monitoring equipment.

For outdoor installations where the unit is exposed to precipitation or condensation, select 1600A Series phones are available with

Enhanced Weather Protection (EWP). EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt

connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP

switches for easy on-site programming. For more information, see DOD# 859.

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - TECHNICAL

1600A Series1600A SeriesADA CompliantEmergency PhonesSeptember 18, 2014ADA* Compliant Emergency Phones with Built-In Digital Voice Announcer• New Aut

Seite 2 - 1600A Series Phone

b. Enabling/Disabling Central Station ModeThe 1600A Series emergency phone can be placed in the “Central Station Mode” by entering a central station

Seite 3 - EMERGENCY

c. 4+1 Express FormatThis DTMF format consists of a four digit account code, two digit message type, and a single digit event code.Account CodeMessag

Seite 4

ZF303450 Rev AB. Central Station OperationAfter the “HELP” / “CALL” button on the 1600A Series phone has been pressed the 1600A Series phone will begi

Seite 5

IInnssttaallllaattiioonnaannddSSppeecciiffiiccaattiioonnssIMPORTANT: Electronic devices are susceptible to lightning and power station electrical surg

Seite 6

EE--11660000AA//--4400AA//--4455AA//--6600AA//--6655AA((ooppttiioonnaallEEWWPP))Dimensions: 133mm x 102mm x 51mm (5.25” x 4.0” x 2.0”)Shipping Weight:

Seite 7 - C. Quick Programming Features

Front View of OptionalVE-5x5 (not included)2.25”* Adhere gasket to front panel,centering over mounting holes5.14”5.22”3.25”4.0" "Help&qu

Seite 8

0.781dia. 7.225.368-32 x .5" setscrews provided1.703.401.703.405.006.781.690.803.30 1.55CALLCONNECTEDEMERGENCYPHONEMODEL E-1600-03BVIKING ©PUSH F

Seite 9 - H. Recording the Announcement

B. Security Code (memory location #19)The security code allows the user/installer to program the 1600A series phone while DIP switch 3 is in the ON (n

Seite 10 - I. Assisted Programming

E. Identification Number (memory location #20)The Touch Tone I.D. number (up to 20 digits) is used by emergency personnel to identify the location of

Seite 11 - XXXX 18 1 60600 XXX #21

If enabled and a busy is detected, the 1600A series phone will dial the next pro-grammed speed dial number, and continue to cycle through the numbers

Seite 12 - XXXX 27 XX #20

H. Recording the AnnouncementStep 1. Call into the 1600A series phone with a Touch Tone phone and access programming.Step 2. Enter Q4, wait for the t

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Viking Emergency Phones

Um das Dokument anzuzeigen Viking Emergency Phones Bedienungsanleitung

Viking Emergency Phones Bedienungsanleitung (4 Seiten)

Um das Dokument anzuzeigen Viking Emergency Phones Spezifikationen

Viking Emergency Phones Spezifikationen (4 Seiten)

Um das Dokument anzuzeigen Viking Emergency Phones Bedienerhandbuch

Viking Emergency Phones Bedienerhandbuch (10 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Viking Emergency Phones Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Sicherheitszugriffskontrollsysteme Viking Emergency Phones herunter. Viking Emergency Phones Specifications Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Viking Emergency Phones

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Viking Emergency Phones