Viking BLK-3-EWP Spezifikationen PDF herunterladen (Seite 6)

C. Security Code (memory location #19)

The security code allows the user/installer to program the 1600A series phone while DIP switch 3 is in the ON (normal)

position. The factory set security code is 845464 (V-I-K-I-N-G). It is recommended that the factory set security code

be changed. Example: To store 123456 as the security code:

Enter Your Security Code Here:

#19

Step 1. Access programming as shown is Programming section A.

Step 2. Enter 123456 #19..

Step 3. Hang-up.

Note: The security code must be 6 digits and cannot include a

or a #.

B. Quick Programming Features

First emergency speed dial number .........................................................................

Second emergency speed dial number ...................................................................

Third emergency speed dial number .......................................................................

Fourth emergency speed dial number .....................................................................

Fifth emergency speed dial number .........................................................................

Central station receiver number ...............................................................................

Central station voice number ...................................................................................

First “Info” speed dial number (E-1600-20A and E-1600-52A only) .........................

Second “Info” speed dial number (E-1600-20A and E-1600-52A only) ....................

Third “Info” speed dial number (E-1600-20A and E-1600-52A only) ........................

Voice announcer options (factory set to 000000) .....................................................

Timing/Dialing options (factory set to 234111) .........................................................

Security code (factory set to 845464) ......................................................................

Identification number (factory cleared) ....................................................................

To add a

4 at any point in the dialing string ..............................................................

To add a # at any point in the dialing string ..............................................................

To add a four second pause at any point in the dialing string ...................................

To switch to pulse dialing at any point in the dialing string ........................................

To clear any speed dial number ...............................................................................

Note: A double beep indicates a valid memory position, four beeps indicate an error.

0-20 digits

6 digits

0-20 digits

(no digits)

#00

#01

#02

#03

#04

#05

#06

#07

#08

#09

#17

#18

#19

#20

#00 - #09

Enter Digits

then

- then -

Enter Memory Location

The 1600A Series emergency phones can be programmed from any Touch Tone

phone using a C.O. line, analog PABX/KSU station, or a DLE-200B Line Simulator.

A. Accessing the Programming Mode

Step 1. Move DIP switch 2 to the ON position (sets unit to answer incoming calls, see section J).

Step 2. From a Touch Tone phone call the line attached to the 1600A Series phone.

Step 3. When the 1600A Series phone answers, enter the 6-digit security code (factory set to 845464, see section C). A

double beep should then be heard indicating you have entered the programming mode.

2. Without the Security Code

1. Using the Security Code

Step 1. Move DIP switch 2 to the ON position (sets unit to answer incoming calls, see section J).

Step 2. Move DIP switch 3 to the OFF position (incoming calls enter Programming without security code, see section J).

Step 3. From a Touch Tone phone call the line attached to the 1600A Series phone.

Step 4. When the 1600A Series answers, a double beep will be heard and will automatically enter the programming mode.

Step 5. When finished programming, move DIP switch 3 back to the ON position (see section J).

Need More Information on the DLE-200B?

Call (715) 386-4345 and select 605.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Viking BLK-3-EWP Spezifikationen Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Viking BLK-3-EWP