9
EElleeccttrroonniicc TTeemmppeerraattuurree SSeettttiinnggss
The electronic controls are located behind the door above the cabinet
interior. Press
Activate Controls
pad to activate control panel. All
other pads except for
Alarm Off
pad, remain inactive until
Activate
Controls
pad is pressed. Once activated, pads remain programmable
for at least 10 minutes.
Unit controls are preset at the mid setting, (5 bars are displayed). Wait
24 hours after connecting power for All Refrigerator or All Freezer
cabinet to reach this setting. After 24 hours, adjust controls as desired.
1 bar displayed is the warmest setting and 9 bars displayed is coldest
setting.
•To adjust refrigerator or freezer temperature, press
Activate
Controls
pad then
Ref Temp
pad or
Freezer Temp
pad. Press
Higher Temp
pad or
Lower Temp
pad to adjust temperature
setting 1 level at a time. Holding down
Higher Temp
pad or
Lower
Temp
pad adjusts temperature more than 1 level at a time
EEnnttrryy TToonnee
Entry tone is the “beep” heard when a pad is pressed and command is
read and accepted.
•Deactivate entry tone by pressing and holding
Activate Controls
pad for 3 to 5 seconds. Three short beeps indicate instructions
were accepted.
•Activate entry tone by pressing and holding
Activate Controls
pad
for 3 to 5 seconds.
MMaaxx RReeffrriiggeerraattoorr MMooddee ((AAllll RReeffrriiggeerraattoorr OOnnllyy))
Max Refrigerator Mode adjusts All Refrigerator temperature to the
coldest setting for 10 hours. Then the refrigerator temperatures
automatically return to previous setting.
•Activate Max Refrigerator Mode by pressing
Activate Controls
pad
then
Max Ref
pad. Indicator light will glow.
•Deactivate Max Refrigerator Mode before automatic reset by
pressing
Activate Controls
pad then the
Max Ref
pad.
8
BBeeffoorree UUssiinngg YYoouurr UUnniitt
To obtain the best possible results from your unit, it is important that
you operate it properly. This section tells you how to set the
temperature controls, how to operate the features in your unit, and
how to save energy.
UUssiinngg tthhee ppoowweerr oonn//ooffff sswwiittcchh ((ppoowweerr iinntteerrrruupptteerr sswwiittcchh))
The power on/off switch is located behind the top grille. It is used to
turn the power to the unit off when cleaning it or changing the light
bulbs. The unit is shipped with the power interrupter switch on.
To turn power off:
1. Remove center grille blade.
2. Press power on/off switch to the OFF position.
To turn power on:
1. Press power on/off switch to the ON position.
2. Replace center grille blade.
IIMMPPOORRTTAANNTT::
Be sure the power on/off switch is in the ON position
after cleaning the unit or changing light bulbs.
UUssiinngg tthhee sshhoowwrroooomm s
swwiittcchh
The showroom switch allows electronic controls and interior lights to
function independently of refrigeration system. Showroom switch is
located behind the top grille to the right of the control panel. The unit
is shipped with the showroom switch in the on position.
Showroom switch on - full cooling power to unit.
Showroom switch off - no cooling in unit (power only to lights and
electronic controls).
PPoowweerr SSwwiittcchh
SShhoowwrroooomm
SSwwiittcchh
(20 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern